The new Yamaha P5000S Power Amplifier delivers a robust amount of professional quality power and is designed to suit almost every need. In mono bridged mode, the P5000S delivers 2600 watts of clean, dependable power.

Those on a budget will find the newYamaha P5000S has more than enough power output and doesn't put a strain on even the most modest budget. Further savings are realized with extremely efficient operation using Yamaha's exclusive EEEngine technology which keeps operational costs down by significantly reducing AC power consumption and heat generation.

Look at the specifications and you'll notice that the P5000S is light in weight, which makes transport and setup less strenuous. What's even more amazing is the comparison in weight per watt delivered by the P5000S. The use of a switching power supply makes the P5000S very lightweight while maintaining superior audio quality.

The new Yamaha P5000S has an industrial design that delivers a refined and impressive look with deep blue faceplates bordered in silver trim, handles, and mounts. The chassis is specially designed to provide added durability and strength. Continuously variable-speed fans mounted internally on either side of the front panel offer quiet, efficient cooling.

Comprehensive protection consists of power on/off muting, DC detection, thermal protection, current limiting, and a protective cover for the attenuators is also supplied. If you need a dependable, professional amp that will work day after day, and night after night, you need the new Yamaha P5000S.

Model			P5000S
Output Power
1kHz,  THD+N=1%		8Ω/STEREO	525W+525W
1kHz,  THD+N=1%		4Ω/STEREO	750W+750W
1kHz,  THD+N=1%		8Ω/BRIDGE	1500W
20-20kHz,  THD+N=0.1%		8Ω/STEREO	500W+500W
20-20kHz, THD+N=0.1%		4Ω/STEREO	700W+700W
20-20kHz,  THD+N=0.1%		8Ω/BRIDGE	1400W
1KHz,  20mS nonclip		2Ω/STEREO	1300W+1300W
1KHz,  20mS nonclip		4Ω/BRIDGE	2600W
Power Bandwidth		halfpower
THD+N	20Hz-20kHz, half power
Intermodulation Distortion	60Hz: 7kHz, 4:1, half power
Frequency Response		Po=1W RL=8Ω
Channel Separation	half power	RL=8Ω
	Att.max	input 600Ω shunt
Residual noise Att. min		DIN AUDIO
S/N ratio		DIN AUDIO	103dB
Damping Factor	RL=8Ω	1KHz
Sensitivity @8Ω		Att.max	+6dB
Voltage Gain		Att.max
Input Impedance
Controls		Front Panel
		Rear Panel
Connectors		Input
		Output
Indicators	POWER
	PROTECTION
	TEMP
	YS PROCESSING
	SIGNAL
	CLIP
Load Protection
Amplifier Protection
Limiter Circuit
Cooling
Power Requirements
Idle Power Consumption			35W
1/8 Power Consumption (4Ω)			550W
Maximum Power Consumption (4Ω)			3000W
Dimensions (W x H x D)
Weight			26.5 lbs
0dB=0.775V half power=1/2 output power

There are no reviews for this product.
Already own this product? Be the first to write a review!